Machines
Shrink Sleeve Seaming & Gluing Machine
Fully automatic, mould-less shrink sleeve seamer for PVC, PETG and OPS — up to 600 m/min, seam 30 – 350 mm.
The machine forms printed shrink film into a continuous sleeve, applies solvent glue and seals the centre seam, then rewinds the finished sleeve ready for cutting. It runs PVC, PETG and OPS shrink film from 30 to 100 microns, at speeds up to 600 metres per minute.
It is a mould-less machine. The forming wheel and forming table are driven by servo motors and set from the screen, so changing from one sleeve width to another does not require a set of forming templates. Seam widths from 30 to 350 mm are covered on the same machine.
The glue system uses a double-channel dispensing gun whose angle is adjustable up and down and forward and back, fed from a pressurised glue tank. A drying blower speeds the evaporation of the solvent, which allows the higher running speed.
Photographs
Features
- Mould-less forming — sleeve width is changed from the screen, with no set of forming templates to buy, store or fit.
- Seam accuracy of ± 0.5 mm across the full 30 – 350 mm range.
- Speeds up to 600 m/min, supported by the pressurised glue supply and the drying blower.
- Automatic stroboscope holds a still image of the seam and follows the line speed, so the seam is checked while running.
- Folded tube width is measured automatically after sealing.
- Servo drives on unwind, forming, glue application and rewind.
- Rewind with automatic tension control and swinging oscillation winding for stable, evenly built rolls.
- Cantilever air-expanding unwind shaft with automatic inflation for fast roll changes.
- Touch-screen control of all settings from one panel.
Specifications
Technical parameters
Equipment
Optional
- Horizontal and vertical tear line
Photographs are for reference only. Miroplastic reserves the right to improve the specification of its machines without prior notice. Actual output depends on the material, width and thickness run.
Interested in this product?
Contact Miroplastic for pricing, availability, and technical specifications. Based in Beirut, serving Lebanon, Syria, GCC, Angola, and Africa since 1978.